The material enters the hopper, and the coarse feed is broken into the crushing studio through the spiral feeding sleeve. Under the centrifugal force, the material rotates with the squeegee on the rotor. Because the cutter is placed on the stator, the material is in the process. It is crushed and reaches a certain particle size. It is discharged from the waist or round discharge hole on the stator, and is sent to the next process by an additional single screw pump. Side cover secondary safety protection; the adjustable surface of the two-sided tooth structure of the knife row is used; the operation platform can be made according to the process requirements.
Model | Processing power T/h | With power KW | Overall dimensions mm |
CPS-2T | 1～2 | 3.0 | 980×750×1650 |
CPS-5T | 3～5 | 5.5 | 1130×850×1850 |
CPS-10T | 6～10 | 11.0 | 1280×1000×2000 |
CPS-20T | 12～20 | 22.0 | 1830×1100×2500 |
